Dark Lager - Tasting

It has been four months since I brewed up this dark lager - my first attempt at a lager.  This was comprised of a 3 week primary fermentation, 6 week lagering period and than a good month and a half to allow it to bottle condition as I chose not to add any more yeast at bottling.  I was starting to wonder if it would ever carb given the 6 weeks at 35 F during the lager but this beer proves that yeast are a pretty hardy organism.

I was hoping this would turn out to be a flavorable malt forward beer.  It has turned out to meet that objective.  I am also enjoying the very clean lager yeast character in this beer - it really does allow the other ingredients to shine through.  The beer finished up a bit higher than expected (1.020 vs 1.016) but I think that helps sell the malt character a bit and it still has really good drinkability - I'd take a bit sweeter over a bit drier than desired with this beer.

I'm pretty happy that I managed to produce a lager without any off flavors.  I've enjoyed the process and will look to brew some more of these beers.

Tasting Notes:

• Aroma:
• Clean aroma.  Sweet malt.  Very light grassy hop smell.
• Appearance:
• Pours with a two finger head that quickly settles down to a thin layer that lasts for the entire glass.  Leaves slight lacing.  Dark brown color.  Very clear but it has hop particles in suspension even after spending several days in the fridge.
• Flavor:
• Very crisp and clean flavor up front.  Some cool alcohol in the middle.  The finish is slightly sweet and bready malt with a bit of hop bitterness.  I'm not detecting anything I can identify as flavoring hops
• Mouth-feel:
• It's medium bodied but pretty easy drinking.  Carbonation is light.  The flavor coats my mouth and lingers.
• Overall:
• It's a nice malt forward beer.  I really like the sweetness in the finish.  The slight bitterness is enough to balance the sweetness.  It has the clean, lager, taste I was expecting - not really sure how to describe it except that it's very much like commercial lagers.  It would be interesting to brew this beer with a flavorful English yeast for comparison.

Flanders Red 1.3.2

This is a second beer to split my third pitch of Roeselare yeast cake onto.  For the first beer (1.3.1), I pitched a primary yeast and let it ferment out for two weeks.  This second beer is sort of a control version using the same direct pitch method I used for my first two batches of Flanders Red (1.1.1 and 1.2.1).  It will be interesting to see how these two beers using the third pitch vary in character.

I have kept pretty much everything else the same from the previous batches.  Same grain bill and hopping and the same target mash temperature in the high 150 to low 160s range.  I think this is a pretty good recipe but I might have to start playing around with some slight grain bill changes for the next round.

I am accumulating quite a stockpile of these Flanders Red beers.  I'm excited that I'll quite a few blending options next year.

Recipe Details:

• Grain:
• 4 lbs Pilsner
• 4 lbs Munich
• 3 lbs 8 oz Vienna
• 1 lb 8 oz Flaked Wheat
• 12 oz CaraMunich
• 12 oz Aromatic
• 12 oz Special B
• Hops:
• 1 oz Fuggle (Pellet, 3.8% AA) at 60 min
• Yeast:
• Wyeast 3763 Roeselare Ale Blend (Third Pitch)
• Water:
• 10 gal Spring Water
• 1 tsp Calcium Chloride
• 1 tsp Gypsum
• 1 tsp Irish Moss at 15 min

Process Details:

• Batch Size:
• 6 gal (Target 6 gal)
• Mash:
• 161 F for 60 min (Target 162 F for 60 min)
• Boil:
• 60 min (Target 60 min)
• Fermentation Temp:
• 60 F to 75 F (Ambient Basement Temps)
• Primary Duration:
• 3 months
• Secondary Duration:
• TBD (15 to 33 months)

Results:

• OG:
• 1.052 (Target 1.062)
• Efficiency:
• 60% (Target 70%)
• FG:
• TBD (Target 1.012)
• Apparent Attenuation:
• TBD (Target 80%)
• ABV:
• TBD (Target 6.83%)

Brewing Notes:

• 4/11/15 - Brew day - 7:10 AM to 10:50 AM - Including setup and cleanup:
• Brought 7 gal of strike water up to 190 F - Took 35 min
• Added CaCl and gypsum to the kettle as it was heating
• Moved 5 gal of strike water to the Mash Tun and let settle for 10 min - ended up at 178 F
• Added the grain and stirred to eliminate any clumps
• After 10 min the mash was at 161 F - pretty much right on target
• Gave the mash a good stir after 30 min to help conversion - was still at 161 F
• Brought 5 gal of batch sparge water up to 190 F - Took 25 min
• After 60 min the mash was between 156 and 158 F

• Stirred, vorlaufed, and drained the mash (slow at first and then up to full speed)
• Added 5 gal of sparge water to the mash (raised it to 180 F).  Stirred, vorlaufed, and drained
• Collected 8 gal of wort
• Brought up to a boil - took 20 min

• Added the 60 min hops after the hot break subsided
• Added Irish Moss once the beer had boiled down to 6.5 gal
• Put the chiller in to sanitize at flameout
• Chilled down to 60 F which took 12 min
• Transferred to the (unwashed) fermentor.  I allowed most of the cold break to go over but kept most of the hops behind in the kettle
• Moved down to the basement to ferment
• 7/12/15 - Transferred off the yeast cake into a glass carboy to make way for my next batch (1.4.2).  Measured the gravity as 1.002.  The beer has the same fruity smell that the others have had.  There is a light pellicle over the beer.  It is pretty sour - the most sour of all the batches so far (haven't tasted the others recently though).  I'm wondering if the higher temperature (it's been 70 F in the basement for the last month) could be responsible for this.  It's a nice tasting beer although it may have a bit less of the fruity complexity that some of the others had at this point.  I'm really happy that I've finally managed to get a sour one.

• 7/23/17 - Status Report:
• Earthy funk dominates.  A bit of fruity character mixed in.  Has a rich smell
• Red/orange and slightly cloudy
• Light sourness.  Brett earthiness fairly assertive.  Good level of malt flavor in the finish
• Fairly mild in terms of flavor but has a nice level of complexity
• 9/4/17 - Used 3 gal of this batch for a blend of Cherry Flanders Red along with Flanders Red 1.1.1.  I moved the remainder of 1.3.2 into the fermenter with the remaining 1.1.1 beer.
• 12/16/18 - See 2018 Status Report

Lessons Learned:

1. I'm getting fairly consistent number on these beers now.  Efficiency isn't too good though.  In another month I should have my RIMS setup that I'll use for fly sparging.  This should allow me to apply the process a bit more consistently.  I'm sure it will lengthen my brew day though.
2. We are getting into the warmer months now.  I'll have to keep an eye on the basement temperature - will be interesting to see the effect warmer temps down in the basement have on the character of these beers.

Dark Chocolate Sour

With my typical 70% efficiency I am leaving quite a bit of sugar in the grain that's getting thrown away.  With a big beer that 30% amounts to enough gravity points to make reasonably potent small beer if one is inclined to do the work to get it via a parti-gyle mash.  Normally I am not inclined but today I decided to do it using the grain bill for a Bourbon Barrel Chocolate Imperial Coffee Stout.  I'm going to make a sessionable sour chocolate stout with it.

I have never had a chocolate sour beer before but there are a number of breweries that make them.  I have had Tart of Darkness from The Bruery which combines roasted and sour flavor in a pleasing package.  This gives me confidence that this experiment could work.  I will use some of the yeast cake from Flanders Red 1.2.1 to ferment this beer.

I don't have any extra hops to use for the beer so I am going to boil in the unwashed kettle used for the previous beer which will still have the hops from the last batch.  This recipe doesn't really call for any hop bitterness so I'm sure this will be fine.

I'll be taking first runnings and one batch sparge for the big beer.  My one concern is that the remaining sugars in the mash may not be easily extracted.  In order to get a bit of insurance I will be adding about 3 lbs of pale malt to the mash before parti-gyling this one.  I am hoping the gravity will end up in the 1.03s somewhere.  I'll be fermenting and aging this beer in a 5 gal better bottle.  I'm going to shoot for 4.5 gal to give myself enough head space.

I'll probably look to age this beer for a year to a year and a half.  This beer could be a good candidate for adding fruit if it doesn't end up getting very sour from just the sugar in the grain - raspberries could be a good match for this.

This is basically a free beer so if it turns out to be a failure I won't be that disappointed.

Recipe Details:

• Grain:
• 3 lbs 2 Row
• Grain bill from Bourbon Barrel Chocolate Imperial Coffee Stout
• Hops:
• Spent hops from Bourbon Barrel Chocolate Imperial Coffee Stout
• Yeast:
• Wyeast 3763 Roeselare Ale Blend (2nd pitch Slurry)
• Water:
• 6 gal tap water
• Extras:
• 2 Tbsp of Hershey's Special Dark Chocolate Powder at 5 min

Process Details:

• Batch Size:
• 4.5 gal
• Mash Temp:
• 152 F to 145 F for 90 min
• Boil:
• 1 hr
• Fermentation Temperature:
• Ambient Basement Temps (60 to 75 F)
• Primary Duration:
• TBD (12 to 18 months)
• Secondary Duration:
• TBD

Results:

• OG:
• 1.036
• Efficiency:
• NA
• FG:
• TBD (Target 1.004)
• Apparent Attenuation:
• TBD (Target 89%)
• ABV:
• TBD (Target 4.20%) 

Brewing Notes:

• 3/29/15 - Brew Day - 12:30 PM to 2:45 Including Cleanup
• Added 2 row to the mash tun after running off the sparge from the previous beer
• Added 3 gal of 185 F strike water - temp settled out at 152 F
• Let it mash while I completed the previous beer - this took 90 min - Mash ended up at 145 F
• Mashed out without a vorlauf - collected 3 gal of wort
• Added 3 gal of cold tap water as a batch sparge, stirred, and drained
• Ended up collecting 6.25 gal of wort
• Brought to a boil - took 20 min

• Boiled until it got down to 4.5 gal
• Added cocoa powder at 5 min
• Put the chiller in to sanitize at flameout
• Chilled down to 60 F - took 6 min
• Measured gravity as 1.036.  The beer has a pretty strong chocolate flavor.  No hop flavor at all which shouldn't be surprising.  The beer isn't really that sweet.  Hopefully I ended up getting quite a bit of starch that will keep the souring bugs happy over time
• Transferred to better bottle with a siphon hose
• Pulled yeast off the bottom of my Flanders Red 1.2.1 with an auto-siphon
• Left down in the basement with a tee shirt covering it to protect it from the sun.  I will plan on a gravity sample/taste test in a month
• 3/30/15 - No foam on the surface but the airlock was bubbling this evening
• 5/16/15 - After a month and a half, I checked the gravity which was all the way down to 1.002.  No sourness or funk have developed yet - not sure they are ever going to as low as this is already.  It's a pretty watery/weak beer - it definitely needs something else going on.  I'll give it a few more months to see what happens to it.
• 9/13/15 - Transferred the cherries from this Berliner Weisse to the beer.  The cherries were falling apart from their aging the the previous beer but probably still have a bit of flavor to impart.  We will see.
• 1/15/6 - Added about a liter of DME based wort that had been souring with my culture of Lacto Brevis.
• 3/6/16 - Added another liter of DME based worth I'd been using to feed my Lacto culture.  I'll need to give this beer another try some time soon.  I had a Chocolate Gose in AZ last weekend which was as interesting as I thought it might be.  Was a good combo.
• 4/17/16 - Tasted a small sample of the beer.  The lactic acid culture I added has made the beer plenty sour.  Still hasn't developed any of the rich flavors I would expect from Roeselare.  I'm thinking this one is as good as it's going to get and is ready to bottle.  The sample had a lot of cherry fruit solids in suspension.  I will rack it off the cherries into a bucket fermenter and then cold crash it here in the next couple weeks.

Lessons Learned:

1. Doing a parti-gyle really wasn't that much more work to get another beer and it's pretty cool to have a free beer to experiment with.  I will definitely look to do this again in the future.  I think I could get a reasonable projection of the OG if I were to plan ahead next time.

Bourbon Barrel Chocolate Imperial Coffee Stout

My Local Home Brew Shop (Weak Knee) recently acquired another whiskey barrel for a group fill.  I have enjoyed the process of the first one enough to jump on board with this one.  For this round we will be making a stronger beer to stand up to the stronger whiskey and oak flavors of the first use barrel:  a Chocolate Imperial Coffee Stout

This will be the first beer I have brewed with either chocolate or coffee.  Cocoa powder will be added at the end of the boil and then at the start of secondary in the barrel.  We will then age the beer in the barrel for 6 to 8 months before steeping the coffee.

It's a complicated recipe, with a lot of specialty malts, and then with the chocolate, oak, whiskey, and coffee added to the mix.  I think the flavors are of the sort that obviously work well together so I'm pretty confident that we'll end up with a pretty good final product.  The main concern I have is that if the FG ends up too low for enough of our batches that the oak, chocolate, whiskey, and roasted malt could take on too sharp an edge.  My piece of the batch is less than 1/10th of the beer that will be in the barrel so there's nothing I can do to prevent this - hopefully everyone will hit the target FG of 1.019.

We are scheduled to put this beer into the barrel on 4/18 so I'll have just under 3 week to get it fermented out.  I don't expect any issues with this.  I'm really excited to get to do another one of these.

As a last minute decision, based on the huge grain bill and a fairly low projected efficiency, I decided to try my hand at a Parti-Gyle beer which is a second, weaker, beer using the sugars remaining the mash after the first big beer is mashed out.  This will be a Dark Chocolate Sour.

Recipe Details:

• Grain:
• 9 lbs 2 Row
• 2 lbs Roasted Barley
• 2 lbs Chocolate malt
• 1 lb 8 oz Munich
• 1 lb Crystal 40L
• 12 oz Aromatic
• 12 oz Carapils
• 4 oz Black Patent
• Hops:
• 1 oz Cascade (Pellet, 7.2% AA) at 60 min
• 1 oz Fuggle (Pellet, 4.2% AA) at 30 min
• 1 oz Fuggle (Pellet, 4.2% AA) at 15 min
• Yeast:
• Wyeast 1098 British Ale yeast
• Red Star Premier Cuvee (For Priming)
• Water:
• 10 gal spring water
• 1 tsp Calcium Chloride
• 1 tsp Gypsum
• 1 tsp Irish Moss at 15 min
• Extras:
• 1st use Bourbon Barrel 3 oz of Jack Daniels Soaked Oak Cubes
• 5 Tbsp Hershey's Special Dark Chocolate Powder at 5 min
• 5 Tbsp Hershey's Special Dark Chocolate Powder in secondary
• 750 mL of Jim Beam Extra Aged Bourbon Whiskey

Process Details:

• Batch Size:
• 5 gal (Target 5.25 gal)
• Mash:
• 155 F for 70 min (Target 153 F for 60 min)
• Boil:
• 60 min (Target 60 min)
• Fermentation Temperature:
• Ambient Basement Temps (60 to 63 F)
• Primary Duration:
• 5 Weeks
• Secondary Duration:
• NA
• Barrel Aging Duration Secondary on Oak:
• 6 to 8 months
• Coffee Steeping Duration:
• NA - Decided not to use coffee on this batch

Results:

• OG:
• 1.083 (Target 1.077)
• Efficiency:
• 70% (Target 68%)
• FG:
• 1.008 (Target 1.019)
• Apparent Attenuation:
• 90% (Target 74%)
• ABV:
• 9.84% (Target 7.61%)

Brewing Notes:

• 3/28/15 - Made a 1 liter yeast starter with 5.5 oz of LME.  Added 1/8th tsp of yeast nutrient.  Left on the stir plate to propagate over then next 24 hrs

• 3/29/15 - Brew day - 8:00 AM to 12:30 PM including setup (started the Parti-Gyle after this):
• Heated 8 gal of strike water to 185 F (assuming 20 degree loss to the mash tun, a 1.5 ratio of water to grain, and that the grain was at 60 F) - took 40 min
• Added Gypsum and CaCl to the kettle as it was heating up
• Transferred 28 qt of strike water to the mash tun and let the temp settle for 10 min - temp settled out to 178 F
• Added the grain and stirred in (there is a ton of dark malt in this one - the liquid was inky black)

• Measured the temp after 10 min as 160 F.  I stirred to cool until it got down to 156 F.  Restarted the clock on the mash at this point.
• Gave the mash a stir at 30 min - temp was down to 155 F
• Brought 6 gal up to 185 F for the Batch Sparge (and Parti-Gyle Beer) - took 25 min
• After 60 min the mash was at 154 F
• Stirred, vorlaufed, and drained (slowly at first and then at full speed)
• Added 3 gal batch sparge, stirred, vorlaufed, and drained.  Flow was being inhibited by the mash for some reason.  I have to stir and then blow air into the manifold to get a decent flow
• Collected 7.25 gal of pre-boil volume (right on target)
• Brought to a boil - took 15 min
• Added the 60 min hops once the hot break had settled down
• At 6.25 gal the 30 min hops were added
• At 5.75 gal the 15 min hops and irish moss were added
• Added the chocolate with about 5 min left in the boil - I stirred well to help the chocolate dissolve

• Added the wort chiller at flameout to sanitize
• Chilled down to 65 F - took 10 min
• Drained into the fermentor - aerating by letting the wort fall into the bucket
• Collected just about 5 gal (slightly less)
• Pitched the entire starter into the beer - it looked like it was pretty much at the height of it's fermentation activity which should get me a quick start
• Gravity was measured as 1.082 at 65 F which is about 1.083.  The sample had a nice balance between roast and chocolate.  The chocolate seemed to be at a nice level (not too strong which I was thinking might be an issue with 5 heaping tablespoons)
• Setup the fermentor with an airlock as I have quite a bit of headspace
• 3/30/15 - The airlock was bubbling this evening
• 4/9/15 - After a little less than 2 weeks in the fermentor the beer is down to 1.038.  I expected it to be quite a bit lower than that but I guess the large percentage of specialty malt and higher than target mash temp played a factor.  The beer is still bubbling a bit so maybe it will come down a few more points.  It has a nice chocolate flavor along with a firm roast.  The sweetness of the beer doesn't seem out of place - the alcohol level is a bit off the "Imperial" mark though.  This beer will really just be one in a larger blend so it's probably not that big a deal.
• 4/18/15 - Measured the gravity again today - still 1.038.  I guess it's done.  Very surprised at this (only 52% attenuation).  Drove it to homebrew store for transfer into the barrel which will happen next week.

• 5/2/15 - My beer was rejected for the barrel due to a suspected infection.  The beer had accumulated an oily film which could be a pellicle.  It doesn't really look like the pellicle I've seen on any of my deliberately infected beers.  I suspect that it isn't infected and that this film is actually a result of the chocolate as the beer seemed to have accumulated this film very soon after primary fermentation completed (much quicker than I would expect an infection to make itself known).  I did some research and found this forum discussion that seems to be documenting the same observation.  Based on this I felt safe transferring the beer to secondary for monitoring/aging.  I have 1.5 oz of oak cubes soaking in Jack Daniels which I plan on adding to this beer in a couple weeks.  I have been offered some of the beer from the barrel even though I haven't contributed anything to it which is very generous of the group.  Not sure I'll take them up on that but I think it would be very interesting to compare the beer aged in the barrel to this secondary oaked version.

• 5/16/15 - Added whiskey soaked oak cubes to the secondary.  I didn't include any of the whiskey it had been soaking in as it had turned a dark brown and tasted very woody.  Just to note:  I had soaked 1.5 oz of oak in the whiskey.  A few days in the cubes had soaked up quite a bit of the liquid so I topped it off.  They had been floating initially but they eventually sunk to the bottom.  After two weeks of soaking they weigh about 2.5 oz.  I decided to only transfer 1.5 oz of that to the beer.  I will continue to soak the remaining cubes and add them later if it seems like the beer needs it.

• 10/11/15 - Checked on this beer after almost 5 months.  Still no pellicle or other visible sign of infection.  Measured a sample as 1.012 which is shocking to me as the beer had previously stopped at 1.038 (measured twice - a week apart).  I have to eat some crow - there is a definite acidity to the beer that suggests some lactic acid bacterial infection.  The barrel team made the correct choice in booting my beer.  Overall I'd say the beer still holds together pretty well.  Even though is pretty dry the roast flavor doesn't really contribute any out-of-balance astringency.  The chocolate provides a nice dimension and the slight sourness in the finish just provides another interesting component to the flavor.   I don't get any whiskey or oak in the flavor which surprises me.  Given this new development I am going to skip the planned coffee addition.  I will give this beer another 3 months of aging before I check it again to get a feel for whether I have hit a stable gravity.
• 4/17/16 - Pulled another sample of this beer to taste.  I'm not sure what I was thinking with the last sample because with this one I'm not really getting any acidity.  No pellicle on the beer either.  I don't think this beer is infected after all.  It has a bit of fruitiness along with roast and chocolate flavors.  It tastes really nice actually.  The whiskey and oak flavors barely come through.  I am going to put in another 5 table spoons of chocolate powder (sanitized in 1 cup of boiling water) and another 1.5 oz of whiskey soaked oak cubes and let this age a bit longer.
• 8/5/17 - This beer has spent the last year or so in my wife's townhouse basement.  It had a film on the top like it had previously - assuming this was just the chocolate rather than a pellicle.  I am going to bottle today!  Measured the gravity as 1.008.  The beer has a subtle chocolate character along with quite a bit of oak flavor.  The oak provides a bit of sharpness (which may have been what I mistook for acidity initially).  It's a wine-like oak character I would say - it may be that I'm tasting the tannins.  There isn't a lot of whiskey in the flavor profile.  I tried blending some Jack Daniels whiskey into half a cup of the beer and found that 1-2 tsp added enough whiskey character to be interesting.  This amounts to a full 750 mL bottle.  Based on this I am adding a full bottle of whiskey to the beer at bottling.  I chose Jim Beam "Extra Aged" Bourbon for this.  Bottled with a pack of Red Star Premier Cuvee wine yeast.  Added 3 oz of priming sugar.  Ended up with 4.5 gal of beer which got me 46 12 oz bottles.

Lessons Learned:

1. Two batches in a weekend (even a long weekend) is too much brewing for me.  Two and a half batches like I did today is way too much.  I'm exhausted.
2. Brewing with chocolate is fun but the powder is pretty darn messy.  Cleaning the kettle was a pain.  I imagine cleaning the fermentor out is also going to be a pain.
3. FG is a product of mash temp, yeast, and grain bill.  In order to predict FG you need to understand the impact of all three of those variables (and there may be others as well).  I'm not sure there's anything to be done to get an accurate prediction of a recipe the first time you brew it.  This recipe has an unusually high percentage of specialty malt (48%) which made the prediction even more difficult.  Never would have guessed I'd only get 52% attenuation even with this grain bill. 
4. I oaked this batch for 2 years.  The oak character is kind of sharp and "wine-like.  I think I would have been better off charring the oak prior to adding it for aging.  This could produced some more Whiskey like flavors.  I think I'll do that next time I try an oak aged dark beer.

Flanders Red 1.3.1

For the third round of Flanders Red using my Roeselare yeast cake I've decided to brew two batches.  This batch will be fermented for two weeks with regular yeast prior to adding the Roeselare blend while the other batch (1.3.2) will have the Roeselare blend do all the fermenting (as was the case for my first two batches:  1.1.1 and 1.2.1).  I am going to primary with WLP 530 Abbey Ale yeast slurry from my Belgian Double.  I am interested to see how the esters from this beer are transformed by the brett in the blend.

The main concern with allowing a primary yeast to ferment a sour beer first is that it will eat too much sugar and wont leave enough for the brett and bacteria to contribute their flavors to the beer.  I have decided to mash in the high 150s to the low 160s to try to prevent the gravity from coming down too far in primary.  Another potential concern (hypothesized by The Mad Fermentationist) is that oxygen levels in the beer after primary will be fairly low and that this could inhibit the brett from working well.  I am thinking that the three months I've been giving these beers in a bucket fermentor will give the brett enough oxygen to do it's thing.

I like the idea of primary fermentation separate from the souring because it seems like a much more controlled and potentially more repeatable way of brewing these beers.  Just pitching the Roeselare you don't really know how much of the sugar the yeast, brett, and lactic acid bacteria are each eating.  By using a primary yeast strain first you can be fairly sure that the brett and bacteria will be consuming most of the sugar going forward.  This is the method used by Rodenbach for their Flanders Red.

If this goes well I might try a few more rounds of this primary first approach.  It will be interesting to see how this batch compares to the direct 3rd generation Roeselare pitch after a few months of souring.

Recipe Details:

• Grain:
• 4 lbs Pilsner
• 4 lbs Munich
• 3 lbs 8 oz Vienna
• 1 lbs 8 oz Flaked Wheat
• 12 oz CaraMunich
• 12 oz Aromatic
• 12 oz Special B
• Hops:
• 1 oz Fuggle (Pellet, 4.2% AA) at 60 min
• Yeast:
• WLP 530 Abbey Ale Yeast Slurry (4 Cups)
• Wyeast 3763 Roeselare Ale Blend (Third pitch)
• Water:
• 10 gal spring water
• 1 tsp Calcium Chloride
• 1 tsp Gypsum
• 1 tsp Irish Moss at 15 min

Process Details:

• Batch Size:
• 6 gal (Target 6 gal)
• Mash:
• 160 F for 60 min (Target 162 F for 60 min)
• Boil:
• 60 min (Target 60 min)
• Fermentation Temp:
• 60 F to 75 F (Ambient Basement Temps)
• Primary Duration:
• With Abbey Ale Yeast:
• 2 Weeks
• With Roeselare:
• 3 Months
• Secondary Duration:
• TBD (15 to 33 Months)

Results:

• OG:
• 1.056 (Target 1.062)
• Efficiency:
• 62% (Target 70%)
• FG:
• TBD (Target 1.012)
• Apparent Attenuation:
• TBD (Target 80%)
• ABV:
• TBD (Target 6.83%)

Brewing Notes:

• 3/27/15 Brew day - 12:45 PM to 4:30 PM including setup and cleanup
• Brought 7 gal of water to 190 F strike temp - took 35 min
• Added CaCl and Gypsum to kettle
• Transferred 5 gal of strike water to the mash tun and let settle for 10 min - ended up at 179 F
• Added the grain and stirred in to eliminate dough balls
• After 10 min check the temp - was about 160 F (close enough to target to not fool with it)
• Gave the mash a stir at 30 min to help conversion - temp was still at 160 F
• Brought 5 gal up to 190 for sparge - took 30 min
• At the end of the 60 min the mash was still just about 160 F
• Stirred, vorlaufed, and then drained (slow and then quickly)
• Added the 5 gal of water as a single batch sparge - brought mash up to 173 F - stirred, vorlaufed and drained
• Ended up with 8 gal 
• Brought to a boil - took 15 min
• Added the 60 min hops after the massive amount of hot break subsided (it came back about 15 min into the boil and stuck around for most of the 60 min which was very odd)

• Added irish moss when volume got down to 6.5 gal
• Added the wort chiller to sanitize at flameout
• Chilled the wort down to 60 F - took 10 min
• Transferred to the fermentor - aerated by letting it fall a foot or so into the fermentor.  Let most of the cold break get into the fermentor but the hops behind

• Collected 6 gal of wort
• Added 4 cups of yeast slurry to the beer and setup the fermentor with a blow off tube
• Measured final gravity as 1.056.  The wort has a really rich maltiness and isn't that sweet.  I think my plan of preventing the primary yeast from getting the gravity down too far is going to work
• 3/29/15 - This beer was bubbling vigorously this morning.  I'm finding that Wyeast 530 is a pretty strong fermentor - hopefully it won't take this down too far.
• 4/11/15 - After 2 weeks I measured the gravity as 1.006.  This is much more attenuation that I expected (89%).  My Dubbel with the first pitch of WLP 530 only got 82% attenuation.  This is even with what seems like it should have been a much less fermentable wort (mashed in the low 160s).  I'm really shocked by this finding.  I have no idea how this could have happened - will need to do some research.  The beer has a pretty good fruitiness but is boozy.  Transferred it to a new bucket (have about 5.5 gal at this point).  Added half the dregs from Flanders Red 1.2.1.  It is going to be very interesting to see if this beer manages to get very sour.  I think there is plenty of ester character here to get pretty funky though.  Only time will tell.  I plan on doing some more rounds of this primary yeast first method - not sure what I'll tweak next but something will need to be tweaked.

• 7/25/15 - Transferred this beer to a glass carboy for long term aging.  Measured the gravity as 1.000.  It has a good bit of funk and a decent level of sourness.  It didn't end up as sour as 1.3.2 did which is probably due to the lower gravity after primary.  It is quite a bit more sour than every other batch after 3 months though which has to be largely due to the warmer basement temps.  It is quite a bit less fruity smelling than the direct pitch batches have been.  I transferred it onto about half a gal of 1.4.1 which had been primary fermenting in the carboy previously
• 7/23/17 - Status Report:
• Big vinegar aroma from the fermenter- none in the sample though.  Fruity and earthy smells to this beer.  It has a big aroma.
• Orange/red and clear
• Medium level tartness - restrained and pleasant.  Earthy Brett flavor comes through very strongly.  Also has a reasonably strong fruity flavor component.  Get a bit of grainy malt flavor coming through on the finish
• Strong flavor and aroma on this one with a good level of complexity
• 12/16/18 - See 2018 Status Report

Lessons Learned:

1. After a few frustrating batches of missing my mash temp by being too clever with my water to grain ratios I have hit (or gotten very close to hitting) my mash temps in the last couple batches.  I think shooting for a 1.5 qts per pounds ratio of mash water to grain has really helped with this.
2. I was really happy to have only collected 8 gal of wort which allowed me to just to a 60 min boil.  This was my quickest brew day ever at less than 4 hrs.  I don't feel like I had to sacrifice doing anything important for this either.  My efficiency wasn't good but I suspect this was more a product of the high mash temp rather than the amount of sparge water.  I'd trade an hour for a few gravity points anyway.
3. I'm really enjoying this 3 month cycle of brewing these beers.  It fits nicely with the 3 month tasting cycle I'm doing for the maturing beers.  I think this routine can help me hone in on impact of the various choices I've made in brewing these beers.

French Saison - Tasting

It has been almost two months since I brewed my first (and, so far, only) Saison.  Common wisdom says that Saisons should be fermented warm.  I brewed this beer in the low 60s and it turned out to have a very nice level of spicy yeast character that characterizes the style.  The yeast also managed to get the beer down to 1.000 so it seems that it was perfectly happy with the low temps.

I also chose to shoot for a modest OG to try to make an easy drinking beer.  I actually undershot my OG by quite a bit and ended up with an even more modest than intended beer at 1.038 OG.  This was a happy accident as the beer at 5% ABV is refreshing and flavorful but still very low impact which I have appreciated the next morning after drinking a couple of these.

This is a pretty rich style of beer so I'm going to have to try another Saison before too long.

Tasting Notes:

• Aroma:
• The beer has a pretty strong spice aroma - maybe clove-like would be a good descriptor.  It also has a somewhat indistinct fruity smell (maybe citrus) - I wonder if this may be the Sorachi Ace finishing hops.  Overall it's a light but pleasant aroma.  I wouldn't characterize it as a very aromatic beer.
• Appearance:
• It's a golden color.  It cleared up very nicely.  Pours with a pretty good head that quickly dissipates.  There is a bit of lacing left on the glass.
• Flavor:
• Up front the flavor is spicy and slightly fruity like the aroma.  These are somewhat subtle flavors - it doesn't kick you in the head with yeast character.  The hops don't contribute anything that jumps out at me in the flavoring (must just be well blended in with the yeast flavor) but there is a pretty firm bitterness on the finish.  There is also some breadlines and alcohol to the finish along with the spicy fruitiness.  I think it's a pretty good balance but might lean a bit too hard on the hop bitterness (although saisons are often hoppy so this isn't necessarily a flaw).
• Mouth-feel:
• Very dry which makes for a really easy drinking beer.  It's light bodied but it has enough carbonation to avoid feeling thin and insubstantial.
• Overall:
• I like drinking the beer.  If I had fermented warmer I probably would have gotten stronger yeast character out of the beer which would have changed the balance a bit and maybe competed with the lingering bitterness in the aftertaste.  As it is, with such a light beer, I'm not sure having more spicy/fruitiness would necessarily have been an improvement though.  If I were to brew this again, at this gravity, I might go with a slightly lower alpha acid hop for milder bittering.  It could be I'm just not liking the bittering character of the Sorachi Ace hops - will have to try those in another beer sometime to be sure.

Single Hop Pale Ale (Cascade)

I'm just about out of hoppy beer (I should have never let this happen!!!) so I have decided to brew another pale ale.  In the interest of learning more about the contributions of the many different ingredients available I settled on a single hop pale ale using Cascade hops.  I've used them before but with other hop varieties so I've never been sure exactly what they're bringing to the table.

I am going to brew a recipe very closely based on this one from homebrewtalk:  Da Yooper's House Pale Ale.  I really like the grain bill on this one.  I'm going to go for a gravity that will get me an ABV in the 4% to 4.5% range for easier drinking.

The recipe called for the Chico strain but I've decided to use the White Lab 013 London Ale yeast that I just finished fermenting my Oatmeal Brown Ale on.  Sort of odd for a pale ale with american hops.  I'm going to let it sit in the ambient basement temps (low 60s) so I don't expect that it will be overly estery.  Should turn out interestingly.

I've decided to mash at 156 F to try to get the beer to finish between 1.010 and 1.015 but wont mind if it's a bit lower than that.  I have also decided to go with an abbreviated fermentation schedule for this one (3 weeks) to try to preserve as much of the late hop character possible.

As a last minute decision (hope I don't regret it), I decided to try an open fermentation as my lid is currently in use for the oatmeal brown.  I'll be interested to see if this adds any character (or makes a big mess).  I'll be putting the fermentor into the fermentation chamber without temp control to try to protect the beer from airborne particles as much as possible.

Recipe Details:

• Grain:
• 5 lbs Marris Otter Malt
• 3 lbs Vienna Malt
• 2 lbs Munich Malt
• 8 oz Crystal 20L
• 8 oz Crystal 60L
• 3 oz Acid Malt
• Hops:
• 1 oz Cascade (Pellet, 7.2% AA) at 60 min
• 0.5 oz Cascade (Pellet, 7.2% AA) at 30 min
• 0.5 oz Cascade (Pellet, 7.2% AA) at 10 min
• 0.5 oz Cascade (Pellet, 7.2% AA) at 5 min
• 0.5 oz Cascade (Pellet, 7.2% AA) at Flame out
• 1.0 oz Cascade (Pellet, 7.2% AA) Dry hop
• Yeast:
• White Lab 013 London Ale (Re-pitched)
• Water:
• 10 gal Spring Water
• 1 tsp Calcium Chloride
• 1 tsp Gypsum
• 1 tsp Irish Moss at 20 min

Process Details:

• Batch Size:
• 5.75 gal (Target 6 gal)
• Mash:
• 156 F to 158 F (Target 156 F for 60 min)
• Boil:
• 60 min (Target 60 min)
• Fermentation Temp:
• Ambient Basement Temps (low 60s)
• Primary Duration:
• 3 Weeks
• Secondary Duration:
• NA

Results:

• OG:
• 1.050 (Target 1.045)
• Efficiency:
• 71% (Target 68%)
• FG:
• 1.012 (Target 1.012)
• Apparent Attenuation:
• 75% (Target 73%)
• ABV:
• 4.99% (Target 4.33%)

Brewing Notes:

• 3/13/15 - Made a yeast starter.  Used a 1.5 liter starter with 5.5 oz of DME.  Transferred 1 cup of yeast slurry from a previous batch and put onto the stir plate to propagate
• 3/15/15 - Brew day - 7:10 AM to 11:20 AM Including setup and cleanup
• Move the starter to the fridge to drop the yeast
• Brought 7 gal of water to 185 F strike water temp - took 30 min
• Added Gypsum and CaCl to the kettle
• Transferred 17 qt to the mash tun and let settle for 10 min - ended up at 174 F
• Added the grain and stirred to eliminate doughballs - temp ended up between 156 F and 158 F (right on target)

• Checked the mash temp again after 10 min and it was the same
• Stirred the mash after 30 min - temp was still the same
• Brought 6 gal of sparge water up to 185 F - took 20 min
• At the end of the 60 min mash it was around 156 F
• Added 2 gal of mash out water, stirred, vorlaufed, and drained (slowly at first to set the grain bed and then at full speed)

• Added 4 gal batch sparge, stirred, vorlaufed, and drained like before
• Collected 8 gal of wort (this was the goal to get a 60 min boil)
• Brought the kettle to a boil - took 20 min
• Added the 60 min hops after the hot break cleared
• Decanted the spent wort off the starter

• Added the 30 min hops when volume got down to 7 gal
• Put in the irish moss with about 20 min to go
• Added the 10 min hops with a bit less than 6.5 gal
• At flame out added the last bit of hops and the wort chiller to sanitize
• Did a 15 min hopstand
• Chilled the wort down to 70 F - took 7 min
• Transferred to the fermentation bucket - let the wort fall a foot or so to aerate (My oatmeal brown is in the bottling bucket I usually use to slosh the wort back and fourth with in order to aerate).  I believe this will be sufficient

• Moved the beer to the fermentation chamber and pitched the yeast
• Measured the OG as 1.050 which is a bit higher than expected efficiency
• 3/16/15 - A good layer of foam has formed on the top of  the beer - it's neat being able to see the status of the fermentation so easily
• 3/18/15 - The krausen has sunk to the bottom 
• 3/29/15 - Added the dry hops
• 4/2/15 - Cold crashed down to 35 F
• 4/4/15 - Added gelatin for fining
• 4/5/15 - Measured the FG as 1.012.  The beer has a nice citrus/fruity hop aroma.  The flavor is pretty good balance between malt and bitter (bitterness is actually pretty restrained).  Bottled with 4.75 oz of priming sugar.  Ended up with 5.5 gal which got me 54 12 oz bottles.
• 4/30/15 - I've been drinking this for the last couple weeks.  I'm waiting for the hops to mellow a bit before doing the official tasting.  The first 6 beers I drank were very carbonated - I couldn't get through even a soft pour without having to pause for the head to settle.  The last two I've opened have been very lightly carbonated somehow.  I wonder if I didn't get an even mix of priming sugar in this beer.  I skipped the stirring step with this one - just added the sugar water at the start let the cycling of the beer flowing into the bottling bucket mix it in.  May have to be a bit more methodical on my next batch.
• 5/30/15 - Tasting Notes - A nicely balanced and refreshing beer for the summer.
• 5/1/17 - Drank the last one of these.  It was still clean and really nice tasting - no oxidation.  Hops had faded quite a bit as expected.

Lessons Learned:

1. It was a quicker than normal brew day due to only collecting 8 gal of pre-boil volume.  It didn't hurt my efficiency either.
2. I went with a bit over a 1.5 qt to pound ratio of water to grain which worked out well.  I was able to hit the mash temp and maintain it over the 60 min period.
3. Lost about a qt of volume to all the hops in this beer.  I'm glad I was shooting for 6 gal rather than 5 as I'll still have plenty of this beer with 5.75 gal.